I adore these old dingy vintage plastic candelabra lights. I only have two and they used to belong to Joe’s grandma. I don’t know what it is about them but, I especially love the look from outside when pulling in the driveway.
I love them even though they are pretty much the ugliest things. When I unpacked the Christmas stuff this year, reality sank in as to how urine like they were. Sorry, I couldn’t get it out my head either.
I decided to paint them and of course I didn’t want it all one color. White for the candles. Silver for the base. Aaaand, I didn’t want to paint them by hand, I wanted to spray paint them which posed some issues but, I got it done.
A BIG first though….I forgot to clean them. Can you believe it?! So yeah, you might want to wash yours first. I feel like I must also add there was never any actual urine involved. Just in case you were wondering.
Please know some links in this post are affiliate links. If you click on a link and make a purchase, I receive a small commission with no extra cost to you. Thank you. Click here for my full disclosure
Materials I used:
- Vintage Plastic Candelabras
- Silver Spray Paint (what I use)
- White Spray Paint (what I use)
- Something to trace (you’ll see why)
- Tape (what I use)
- Furniture Plugs (similar to what I use)
- Hot Glue Gun & Sticks (similar to what I use)
- Glue Pad
The fact I wanted two separate colors made me put my thinking cap on. Please don’t tell me there’s a better way of doing it outside of hand painting. I may just cry 😉 I decided to start with the base which is when I first realized the bases were different in design and structure. One had an open slot where the cord could be tucked underneath completely.
The base was easy to paint and the candelabras easy to cover. I just wrapped newspaper around them taping it in place.
The candles were a bit more difficult but, once I figured it out, it went fine. Once the silver had dried to the touch, I began working. I could have taped it off but, I was lacking patience and didn’t want to wait. Something made me think either way, the tape would have pulled up the paint anyways. Especially since I’d forgotten to clean them.
The candelabras were at different heights, the two ends lower than the middle, and I couldn’t just slip a full piece of paper over it with 3 holes cut out; which I’d hoped to do until I realized the height difference.
Instead, I cut 3 separate pieces of paper, cutting a circle out so I could slide each piece down over each candle, to the base. I found that a large marker was the perfect size so I traced it onto each of the 3 pieces.
I made sure the paper was all the way down to the base. I knew there would probably need to be little touch ups at the base of the candle and there were. As I said before, with the difference in height, I just wanted to make sure the paper wasn’t so wide that it would touch the base of the middle candle. That would have raised the paper up instead of sitting flush.
Another thing, since I took out the bulbs, I had to plug the socket holes and I found some furniture plugs that worked perfectly! So, even if your candles are a different size, don’t forget you’ll need to protect the socket.
I thought I was done until I saw the ugly yellow cord ruining my new, brighter feel. I grabbed some yarn, sat on the floor and started wrapping. My yarn was already doubled up from another project I’d tried and failed. It involved crocheting a scarf. I’d say it took about 45 minutes per cord and who knows how much yarn but, I also wasn’t in a rush and I’m soooo happy I did it!
I started the yarn underneath the base by tying a large knot so it wouldn’t slip out through the slot and when I got to the end, just before the plug, I dabbed some hot glue and wrapped it back onto itself. My yarn kept twisting and twisting and twisting. It didn’t stop me; just a heads up.
My Amazon Picks
Related ambient wares posts:
We've all seen those old, mostly rusty and worn down old fans but, have you ever...
I honestly don't know if this was originally an old ashtray stand or a lamp. Eit...
Are you wondering what you could do with those old vintage textile spools you ha...