Creepy Halloween Decorations using Thrift Store “Goblets”

Halloween has changed over the years hasn’t it? Sometimes we offer candy. Sometimes we don’t. It’s all about the mood we’re in. Not having kids has a lot to do with it. Although we dressed up well into our 20s and then for whatever reason, we stopped. However, we definitely rocked our DIY costumes.

We’ve been Shaggy and Velma. He’s totally shaggy. Little Bo Peep and her sheep. Joe’s a trooper. I stuffed him into a Faux wool car seat cover. He’s smiling but, he may be dying inside. Mario and Luigi and finally Lego people. Although tons of people thought we were highlighters.

Why am I talking about what we “used” to do for Halloween? Well, I’m missing it. I want to hand out candy. I want to dress up. Does it mean I will? I don’t know. Do you still hand out candy? The only thing I thought would be kind of cool is creepily putting on this black lipstick I hot glued into a Plaster of Paris hand I found at the thrift store. Ugh, that’s all I got.

Creepy Halloween Decorations using Thrift Store “Goblets”

Please know some links in this post are affiliate links. If you click on a link and make a purchase, I may receive a small commission with no extra cost to you. Thank you. Click here for my full disclosure.

Anywhoo, onto these really easy Halloween decorations. I found 5 “goblets” at the thrift store and paid $.50 each since the purple stickers were half off that day. Man, I love a good deal. I’m only calling them goblets since it’s Halloween. I don’t know exactly what they are though. They’re made of metal and are bendable. If I put some force into it, I could probably snap them in half.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

While they would’ve been nice as is, I decided to sand and paint them.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!
A couple had a gold tint to them after sanding. You’ll notice the resin has a slight gold tint as well.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I spray painted the bases in a black matte spray paint and the insides in a red chalk paint.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration! Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration! Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I found some Halloween accessories I thought would look fitting inside the cups and would look extra cool inside of a resin.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I didn’t know how to use resin and if I’d listened to all the horrible comments (of course there were good ones but, I tend to focus on the bad) I wouldn’t have bought it. Well, let’s just say, I rocked the resin. I used this video for a boost of confidence.

I found the resin at Michaels and there was no way I would’ve paid for it had I not had a coupon. I think is was originally $32? I got home and realized I also needed a catalyst or a hardener which helps the resin set. Again, use coupons, friends.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

It really wasn’t hard. Here’s everything I used to ensure my working with resin offered the best possible outcome.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

You’ll also need a tool with a very thin, flat surface to remove the plug.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I marked some red plastic party cups with 1 oz., 2oz., and 3 oz. markings. Just know I suggest you use clear disposable cups instead. It was hard to see if I was actually pouring in the right amount and knowing how much hardener I’d have to put in. It’s also extremely potent so you’ll need good airflow.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I poured the resin into the party cup. I used anywhere from 2 to 3 ounces per goblet adding the hardener according to what the instructions said. Then I mixed it for at least a minute. I’d only mix in enough for 1 goblet at at time.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

I’d also found 6 or so Plaster of Paris hands at the thrift store and thought the little one would look cool. Well, it ended up falling right out of the metal cup after the resin had hardened. I guess I could’ve glued it back in but, I remembered I hadn’t used one of my eyeballs. Plus I just wanted an excuse to use the resin again.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

The eyeball though, was made of styrofoam. PSA: Don’t put anything styrofoam (like said eyeball) in the resin. It will eat the crap out of it. Which is only fitting since it’s a Halloween decor item now.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

Well, that’s my first attempt at using resin and I’m already looking at different things around the house that I could solidify in some clear polyester resin. It went so smoothly and I didn’t have any problem with it taking too long to dry, I’m talking it was solidified in probably a few hours although temperatures will play a factor. I also didn’t have any problem with tackiness.

I’m loving my new creepy Halloween decorations and I’ve also added a few bits and pieces I recently did. I found these awesome free printables and have mod podged them to a couple things.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!
This is actually a hawk feather we found in our yard.

Looking for some easy Halloween decorations or creepy Halloween decorations, Angie at AmbientWares.com has both going on in her post! Check it out for some unique inspiration!

Of course I broke out the one Halloween home decor item I made last year. It’s a spook house from a broken lantern. I really hope you give resin a shot. It was fun and really was super easy. Are you all decked out for Halloween yet?

 

Related ambient wares posts:

14 thoughts on “Creepy Halloween Decorations using Thrift Store “Goblets”

  1. We use to dress up and have so much fun at the annual Halloween party, but things changed. Now when I was working we always dressed up and they still do. Some departments can be very extravagant. It was fun. I love the goblets. The hand coming out turned out to be a happy accident.

    1. I wish I worked at a place where I could dress up. That would give me the boost I need to come up with something fun 🙂 Thanks so much, Debra! My first round of working with resin was a lot of fun!

  2. My hubby and I used to dress up too, but not so much anymore. I think I will hand out candy this year though. Usually I would be working until 7 or 8 and too tired to deal with handing out candy, but not this year! I love your spooky goblets and it does make me want to play with resin now. Oh, and so glad you used those printables ?

    1. There seems to be a theme. Too tired 😀 I love your printables, Amanda! I’d also love to hold on to the Halloween spirit since we enjoyed it so much when we were younger. Times do change though 😉 Thanks so much for stopping by!

  3. Darn it!!!! Why do we have to grow up? We used to love dressing up for Halloween too, and still have all the costumes but seem to be lacking the energy 😉 I love what you did with the resin Angie. It’s so much fun to play with. Did you have any problems with bubbles?

    1. Lacking the energy is a great way to put it 😉 There were slight bubbles in the resin but, they were very hard to see with the red paint underneath and the fact that I had put things within. I really want to make coasters and see how it goes. They’ll actually be clear so I think I’d get a better idea of just how bubbly they are. Thanks, Michelle!

Leave a Reply to Michelle Cancel reply

Your email address will not be published. Required fields are marked *