This project is the easiest project ever! Such an easy project, you don’t need a tutorial. However, there are little bits of info outside of a how-to I hope you find helpful. What I love about this besides being simple is it achieves an entirely different look and function. All I did was take this old foot stool made by my grandpa, flipped it upside down and wrapped it with some rope. Now it functions as a sturdy basket to hold any variety of little home decor items, papers, books, etc.
I looked at it one day and as I do with most of my DIYs, I spun it around, flipped it upside down and wondered if I could make it a basket. I knew I could and I guess the real question was, how can I make it a basket without permanency since I didn’t want to alter it, at least not drastically. It’s not in great shape, it needs some fixes since one of the legs is wobbly but, I don’t mind and I don’t know I’d do it justice.
I thought of different ways I could achieve this without physically effecting the stool.
DIY Basket From A Foot Stool
- Wrap rope around it. Obviously, this was what I ended up doing
- Sew something up that has loops with Velcro that would wrap around the legs. Early on I didn’t think I wanted to hide the legs. I did attempt to do this but, quit because I kinda got frustrated. I blame the tapered legs.
- Use chicken wire and where the ends met, wrap thin wire to keep it tight.
- I did try cardboard covered in fabric and secured it with seam binding going around the legs. It was cute but, ended up being pretty weak.
I did a rough measurement and figured I used approximately 40-45 feet worth of rope. The rope is around 1/2″ thick, maybe a little less than that. It’s a sturdy rope and not stretchy. If it were, I can only guess more would be used. I’m sure we got it from Lowe’s or Home Depot and I know there are multiple sizes to choose from. I definitely wanted thick so I wasn’t wrapping for days. Here are the measurements of my foot stool just to give you an idea.
I also started out with rope that we’ve already used for other things. A big no no. It was cut into multiple pieces and was very frayed. I tried joining the pieces together which did not work well when trying to tightly wrap it. Let’s just say, one of the “joints” popped when I was staging it so I highly suggest using an intact piece of rope 😉 No brainer, right?
The end pieces will fray pretty easily once you cut a clean end. At least with the rope I used so you’ll need to cover them to prevent it. I wrapped each clean cut end with seam binding and hot glued it. Take a look at this cheat sheet explaining types of glues to use when trying to adhere different materials to each other permanently.
The next part goes against exactly what the cheat sheet says but, again, I didn’t want anything permanent. I started by putting a bit of hot glue at the bottom of one of the legs and holding it tight, began to wrap around and around. You’ll have to hold the glued starting point for at least a couple of rounds of wrapping until the pressure of pulling tight lessens. If using wood glue, you’d just need to wait for it dry the recommended amount of time.
The image below is before I lost 2 layers worth of rope due to the break. I used hot glue to finish off the end piece. Remember, according to the cheatsheet, that isn’t the best way to ensure the rope won’t pop off in the future.
While the rope I used provides very sturdy sides, these books are actually resting on the legs themselves. This was also before the meeting point split apart.
It can hold a potted plant. Especially if the container isn’t the prettiest.
I found that it also happened to fit perfectly on our little telephone table’s crossbars. Love how versatile it is.
So, would you do this to a foot stool?
Related ambient wares posts:
While big expensive tools are fun and necessary for DIY projects, smaller inexpe...
I was done with my boring 1" plastic binder so I decided to make my own and now ...
See how we built our own wooden storage shelves using 2x4s and pallet wood.